Blaze ASV-2 Operating Manual Download Page 17 | Manualshive

Page: 17 / 22

background image

Blaze ASV-2 Operating Manual

Page 17

7 Specifications

Operating Temperature Range

-10ºC to +55ºC (14ºF to 131ºF)

Storage Temperature Range

-20ºC to 80ºC (-4ºF to 176ºF)

Humidity

<85% non-condensing

Power Supply

10 to 30Vdc

Current Consumption

Approx. 125mA @ 12V (backlight highest setting), 50mA @12V (backlight
lowest setting)

Display

2.6” 320x240 IPS color LCD display
Minimum 600cd/m2 brightness
Sunlight readable with anti-glare coating
LED Backlight can be set to automatic or can be manually adjusted

Alarm Output

Open collector transistor switch to ground
Maximum rating 0.25A

Dimensions

see Blaze series dimensional drawing

Enclosure

3 1/8” (80mm) ABS, black in color, front or rear mounting. Flame retardant.

Weight

Approx. 160 grams (Instrument excluding cables)

Non-volatile memory storage

100000 write cycles

Altitude sensor ADC resolution

24 bit

Altimeter range

-1500ft to 35 000ft (-457m to 10668m)

Altitude units

ft or m

Baro Correction Range (inHg)

28.00 to 31.00 “Hg

Baro Correction Range (mB)

946 to 1050 mb

Pressure units

“Hg or mb

VSI range

+-20ft/min to +-10000ft/min

VSI units

ft/min or m/s

Airspeed ADC resolution

ASV-2 Version 1: 12 bit
ASV-2 Version 2: 24 bit
ASV-2HS: 13.5bit

Airspeed range

ASV-2 Version 1: 20mph to 250mph
ASV-2 Version 2: 20mph to 350mph
ASV-2HS (High Speed version): 20mph to 320mph

Airspeed resolution

1 mph

Measurement accuracy

+/- 2mph

Serial Port

RS232 voltage levels

Calibration interval

1 Year

As with any instrument, regular zeroing is suggested to achieve maximum performance.

8 Operating the alarms

The alarm output can be used to switch an external alarm indicator. The external alarm switch is an open collector
transistor switch to ground with a maximum rating of 0.25A DC. It is possible to wire the alarm contacts of several
Stratomaster instruments in parallel should this be desired. To avoid false activation of the alarms, the alarm function is
only active 10 seconds after the instrument has powered up.

9 Firmware Upgrading

The ASV-2 can be upgraded in the field by connecting the RS232 port to a PC and running the firmware update program.

Note that only the RS232 port can be used to upgrade the firmware.

Please see the Blaze firmware upgrading document for more information.

«
...
15
16
17
18
19
...
»

Summary of Contents for ASV-2























Reviews:

No comments

Related manuals for ASV-2

LevelMaster 7100

Brand: ABB Pages: 2

Brand: ABB Pages: 4

SMatrix DMX2400

Brand: dallmeier Pages: 12

Brand: National Instruments Pages: 18

Brand: Yamaha Pages: 17

Brand: Yamaha Pages: 23

Brand: Yamaha Pages: 16

Brand: Yamaha Pages: 28

Brand: Yamaha Pages: 19

Brand: Yamaha Pages: 57

Clavinova CVP-204

Brand: Yamaha Pages: 56

disklavier Mark III Series

Brand: Yamaha Pages: 50

Brand: Yamaha Pages: 23

Veeder-Root 7990 Series

Brand: Danaher Pages: 8

Brand: bmcm Pages: 5

Brand: Tektronix Pages: 48

Brand: RADWAG Pages: 176

Brand: Vaisala Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands