Blaze Outdoor Products Instructional Book
Page | 13
Electrical Safety and Installation Warnings
Although your Blaze Portable Grill doesn’t use electricity, the following safety instructions
and warnings should be followed around the grill and cooking area.
Extension cords may be used if care is exercised in their use. If
an extension cord is used:
The marked electrical rating of the cord set or extension cord should be at least as great as the electrical
rating of the appliance
The cord should be arranged so that it will not touch hot surfaces, sharp edges or drape over the
countertop or tabletop (where it can be pulled or tripped over unintentionally).
Outdoor extension cords should be used with products suited for outdoor use. They are surface marked with
suffix letters "W" or "W-A" and with a tag stating "Suitable for Use with Outdoor Appliances".
To protect against electrical shock, the power cord and plug should be kept dry and off of the ground. Do
not clean this product with water spray; do not spray cleaners into the lamp socket area.
Gasoline, lighter fluid or other flammable liquids and vapors should never be stored in the area of this appliance
or any other appliance.
Before installation or service, disconnect the power supply to the work area by removing the fuse, "tripping" the
circuit breaker, or unplugging the unit.
NOTE: Use a 15 AMP Breaker with GFI protection.
Keep any electrical supply cord and fuel supply hose away from any heated surfaces, sharp edges and
dripping grease.
Be certain than any appliance using electricity around the grilling area is properly installed and grounded by a
qualified technician in accordance with applicable codes. To guarantee the electrical safety of this appliance,
continuity must exist between the appliance and an effective grounding system. It is imperative that this basic
safety requirement be met. The manufacturer cannot be held responsible for damages caused by the lack or
inadequacy of an effective grounding system.
Do not operate any appliance with a damaged power cord or power plug, and do not operate any appliance after
the appliance malfunctions or has been damaged in any manner. If this should occur, return the appliance to the
nearest authorized service facility for examination, repair or adjustment.
