OM-BRII90I E V1.05 wo768
August 25, 2015
Page 5
BRII/90I
SPECIFICATIONS
Th
is unit was tested and listed UL 1482-1988 and ULC S627-M93 by
Intertek testing laboratories.
Th
is manual describes the installation and operation of the
Briarwood BRII/90I wood heater.
Th
is heater is certifi ed to comply with the 2015 U.S. Environmental
Protection Agency’s particulate emission limits for wood heaters sold
aft er May 15, 2015.
Under specifi c test conditions this heater has been shown to deliver heat at rates ranging from 10600 to 36000 Btu/hr.
Th
is wood heater has a manufacturer-set minimum low burn rate that must not be altered. It is against federal regulations
to alter this setting or otherwise operate this wood heater in a manner inconsistent with operating instructions in this
manual.
It is against federal regulations to operate this wood heater in a manner inconsistent with operating instructions in this
manual.
EMISSIONS
CO Average(%)
g/hr
Low Burn
1.11
1.66
Med-low Burn
0.92
3.481
Med-high Burn
0.69
2.6
High Burn
0.33
7.682
Model
BRII/90I (non-catalytic)
Overall height and width (incl. shroud)
28 5/8” x 43” (727 mm x 1092 mm)
Width of fi rebox enclosure (behind shroud)
27 3/4” (705 mm)
Width of fan housing to thermostat housing
39 3/4” (1010 mm)
Overall depth and height
22 1/2” x 19 1/2” (572 mm x 496 mm)
Flue collar size and distance from shroud
back
6” I.D., 6 1/8” (156 mm)
Recommended fl ue draft
.05” water column (on high burn)
Fire door opening
21 13/16” x 10” (554 mm x 254 mm)
Firebox depth
12 1/2” (318 mm) brick to brick, 14 5/8” (372 mm) brick to
glass
Firebox width
22 1/2” (572 mm)
Firebox height
12” (305 mm)
Fire box capacity
2.1 cu. ft.
Recommended Fuel length
22” (559 mm)
Wood capacity (approximate):
White oak - 44 lbs. (19.96 kg)
Fir - 35 lbs. (15.88 kg)
Construction
3/16” & 1/4” fi rebox, brick lined, 18ga outer shields.
Shipping Weight (Firebox only)
340 lbs. (154.22 kg)
Chimney recommendation (Minimum)
15’ from stove top to chimney cap: Insulated liner recommended
