background image

Fig. 1:

4

XLf 8A

A few important notes:

By turning the control clockwise, the input sensitivity of the 
ampli er  and, therefore, also the volume increases. However, 
this  is  not  a  volume  control;  no  further  amplif ier  output
can be achieved in the end position, even if it may sound 
like that at the beginning. The system merely increases the 
volume faster if the volume control of the car sound system 
is turned up.

CROSSOVER frequency control

The CROSSOVER control      allows setting the desired exit
frequency band in this base,  20 Hz - 80 Hz is the ideal

Example:

At a setting of 150 Hz, the

  has a frequency range 

 ampli er

of 20 Hz to 150 Hz. We suggest a setting of 80 Hz.

Settings

The  following  control  setting  is  recommended  as  basic 
setting before putting the device into operation: Sensitiv-
ity  (GAIN)  Pos.     to  minimum,  PHASE  Pos.     to  0°,  x-over
Pos.     to approx. 80 Hz. Switch on the device and select a 
musical piece with distinctive bass playback.
Increase the volume of your car sound system to the desired 
volume level. Now slowly increase the VOL control    until
you  can  hear  a  clear 

  of  the  bass  level.  Next, 

ampli cation

use the CROSSOVER control     to select a 

setting that 

lter 

provides a well-contoured bass. You may have to alternately 
optimise the sensitivity setting     and the 

      . 

lter setting

5

4

5

The phase switch     must be set so that the bass is inte-
grated into the acoustic pattern as best as possible and not 
recognisable as an individual source.
Also check your settings of the XLf 8A with the bass con-
trol fully open and, if necessary, with activated loudness. An 
overloading of the subwoofer box by selecting an excessive 
ampli cation Pos.     results in a distorted playback and can 
damage the loudspeaker. 

Power-on indicator 

(PRT/PWR)

Green LED: 

Output stage on, regular operating status.

Red LED: 

Output stage is electronically switched off  due to an error.

Recycling and disposal

Please use the return and collection systems avail-
able to dispose of the product.

Subject to changes!

frequency band.

4

5

5

4

6

6

4

Summary of Contents for XLf 8A









Reviews: