INSTALLATION
Disconnect blue colour speaker
wire
Carefully remove subwoofer
without damaging the plastic
enclosure which can be used for
Blaupunkt BM 1200 WSN
Side by side comparison of OE
subewoofer and BM 1200 WSN
Fit BM 1200 WSN into the plastic
enclosure and tighten the screws
Reassemble speaker cover
Tighten the front and rear screw of
the seat track
Finally, place the seat back to the
floor track
Reinstall the BM 1200 WSN into
the subwoofer compartment
Reconnect the speaker wire
2
3
10
13
11
14
12
15
7
8
9
SPECIFICATION
INSTALLATION
BM 1200 WSN
A piece of 8” BMW direct fit plug & play subwoofer to upgrade OE subwoofer installed for selected BMW models with
paper cone material including installation instructions
•
•
•
•
•
•
•
•
•
•
Normal output power (RMS) : 100W
Max. output power : 200W
Sensitivity : 86dB
Impedance : 4ohms
Frequency response : 44Hz – 3,000Hz
Surround : Rubber
Magnet type : Neodymium magnet
Mounting depth : 36mm
Diameter hole : 229mm
Overall height : 61mm
Remove screw that attach driver
seat to the floor track
Loosen the subwoofer screws
Remove subwoofer
Loosen and remove te 4 mounting
screws of the carpet panel
Tilt seat down to access subwoofer
compartment
OE subwoofer will be visible after
removal of the cover
1
4
2
5
3
6
