8
Installation
System test after installation
The system test allows you to test the external connections to
see that they are working correctly.
Proceed as follows:
1. Turn off TravelPilot DX-V
2. Press the
button and keep it pressed.
3. Turn on the TravelPilot DX-V and release the
button when
the service menu appears.
4. Using the
button, select the test menu
and press the
OK
button.
5. Now select the required test using the
or
button, press
the
OK
button and follow the on-screen instructions.
If the test was completed successfully, the menu item will be
labelled with a tick. If an error occurs, an appropriate notice
will be displayed.
6. Close the service menu by pressing the
button.
Calibration
After installation, the TravelPilot DX-V must be calibrated. You
will find the procedure for this described in the operating instruc-
tions.
Calibrating the Gala curve
After the TravelPilot DX-V is calibrated, the values that were
determined must be transferred to the control unit software so
that the Gala feature (sound-dependent volume adjustment)
works correctly.
Please proceed as follows:
1. Turn off TravelPilot DX-V.
2. Press the
button and keep it pressed.
3. Turn on the TravelPilot DX-V and release the
button when
the service menu appears.
4. Using the
button, select the settings menu
and press
the
OK
button. This procedure transfers the calibration val-
ues that were previously determined to the control unit.
5. Close the service menu by pressing the
button.
