39
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Optical indication for extra
security
Flashing KeyCard tongue
When the vehicle is stationary and the
KeyCard removed, the KeyCard tongue can
be switched to flash for extra anti-theft secu-
rity.
For this it is necessary that the positive pow-
er supply line and the per12 V lead
are connected such as described in the in-
stallation instructions.
Be sure that “LED ON” is adjusted in the
DSC mode.
If required, please refer to chapter “DSC
programming - LED”.
Switching off the flashlight
The flashlight can be switched off by push-
ing in the KeyCard and lock.
If you would like to deactivate the flashing
tongue with general effect, adjust the rele-
vant item in the DSC menu to “LED OFF”.
Care of your KeyCard
For a proper function of the KeyCard it is
important that the contacts are free from any
foreign particles. Avoid direct skin contact.
If necessary, clean the KeyCard contacts
using a cotton swab soaked with alcohol.
Switching the audio source
Using the SRC button you can switch be-
tween the following audio sources:
radio,
CD, or
CDC (AUX)
AUX is only available if no Blaupunkt chang-
er CDC A05 or CDC F05 is connected. “AUX
ON” must be adjusted in the DSC menu.
The CD mode is only available if a disc is
inserted.
To switch to another mode,
•
press SRC briefly.
Short Additional Memory
(S.A.M.)
The second KeyCard available from your
specialised dealer offers you the possibility
to read out any short information, which will
be moved through the display, such as, for
example, the phone number of your car deal-
er or the emergency call number of your
automobile association. Please refer to
chapter “DSC programming - READ KC”.
The freely selectable text with a maximum
of 48 characters can be programmed by all
dealers who have the required equipment
available.
Turn On Message (T.O.M.)
The second KeyCard available from your
specialised dealer also allows you to dis-
play a special turn-on message each time
the radio is switched on.
The freely selectable text with a maximum
of 48 characters can be programmed by all
dealers who have the required equipment
available.
The programmed text will be displayed each
time you turn on your system with the sec-
ond KeyCard.
