2 IN 1 AIR COMPRESSOR / INFLATOR
2 IN 1 AIR COMPRESSOR / INFLATOR
8. Replacing Fuse
WARNING:
Ensure the device is switched off and disconnected from the power source
before performing any of the following steps.
1. Unscrew the top of the 12v socket to expose the fuse.
2. Replace the fuse and screw the top back onto the 12V socket.
The 12v socket is fitted with a 10A fuse to protect the air compressor. If the compressor has stopped
working and no lights or LED’s illuminate, the fuse may need to be replaced.
9. Trouble Shooting
Problem
The compressor does not start
The compressor starts
but there is no pressure
LED torch does not turn on
Low pressure items
(such as sporting equipment)
not fully inflated
Cause
Compressor not connected
to a power source
Insufficient supply voltage
Fuse needs replacing
Loose hose connection
The seals are damaged
Compressor not connected
to a power source
Internal line pressure
of the inflation hose
exceeds preset pressure
Solution
Connect the 12V socket to a
12V DC outlet
Try another 12V outlet
Replace Fuse
Check the compressed air
hose and adaptor and replace
if necessary
Check the seals and have any
damaged seals replaced by a
service centre
Plug the 12V socket into
a 12V outlet
Increase the preset pressure
on the LCD display & switch
the compressor off
Maintenance
10. Cleaning & Maintenance
WARNING:
Before cleaning your compressor or carrying out any maintenance procedures,
ensure the compressor is switched off & disconnected from power supply.
Ÿ
Keep the ventilation vents of the compressor clean at all times, if possible, prevent foreign matter
from entering the vents.
Ÿ
After each use, blow air through the compressor housing to ensure it is free from all dust particles
which may build up. Build up of dust particles may cause the compressor to overheat and fail.
Note:
Blaupunkt will not be responsible for any damage or injuries caused unauthorised repairs of the
compressor or mishandling of the compressor.
Ÿ
if the enclosure of the compressor requires cleaning do not use solvents but a moist soft cloth only.
Do not let any liquid get inside the compressor; do not immerse any part of the compressor into a
liquid.
WARNING:
Wait until the compressor has completely cooled down to prevent burns.
Cleaning
IMPORTANT:
Store the compressor only in a dry location which is not accessible to unauthorised
persons. Always store upright.
Description of Symbols
Volts
Watts
Direct current
Milliamperes
Warning
Electrical Emissions
Conformity (EMC)
Read instruction manual
Indoor use only
Caring for the Environment
Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled
material decreases pollution in the environment. Please recycle packaging where facilities
exist. Check with your local council authority for recycling advice.
Power tools that are no longer usable should not be disposed of with household waste but
in an environmentally friendly way. Please recycle where facilities exist. Check with your
local council authority for recycling advice.
