Blaupunkt SMS601, Owner'S Manual

Page: 7 / 80

5
1. Lid
2. Buckle
3. Power indicator
4. Thermostat indicator
5. Plates (5a: roasting, 5b: for waffles,
5c: grilling)
6. Plate’s locks
BEFORE FIRST USE
1. Remove all the cardboards, papers, foils which secure the appliance and it’s parts.
It is recommended to turn on the device first to „burn it out”. Keep the appliance operate for few
minutes to get rid of manufacturing odour. Device could emit some smoke. That’s normal.
2. Clean the device with suggestion mentioned in chapter CLEANING AND MAINTENECE.
REMOVABLE PLATES
To remove the plates, release the locked latches blocking heating plates and remove the plates. To
insert plates, embed plate into catches and then press it to snap blocked the plate.
USING THE DEVICE
Prepare all ingredients.
Choose the right plates and put it into the device.
1.
Connect the device to the mains. Power indicator and thermostat indicator will light up. Device
will start to heat up.
2. When thermostat indicator will go off, appliance reaches high temperature and it is ready to
work.
3. Place the ingredients evenly over the bottom heating plate.
4. Close the lid
5. During operation the thermostat control light will light up and down. Thermostat will keep the
optimal temperature.
6. The cooking time is usually from 5 to 15 minutes, depends on the ingredients used and the taste
preferences.
ATTENTION: During cooking, some steam can go out from under the lid.
7.
To take prepared food out open the lid and use plastic or wooden utensils.
8. Before next batch, close the lid and wait until plates accumulate temperature, until thermostat
control light will goes off.
9. After use disconnect the plug and let the device cool down.
CLEANING AND MAINTENANCE
1. Before cleaning, disconnect the plug from mains and wait until device cool down.
2. Clean with dump cloth, then dry with dry cloth or paper towel.
3. To clean stubborn remains spread a small amount of cooking oil, and after a few minutes, gently
remove it with a wooden spatula.
4. Do not clean the heating plates with sharp, abrasive cloths or sponges, or use scouring powder
because they can damage the smooth non-stick coating of the plates.
5. Do not immerse device in water.
SMS601