78
Note:
●
If you have already adjusted the
graphic equalizer manually or if you
have not yet carried out any cali-
bration, “NO RESULT” will appear
in the display.
➮
Press the softkey
4
assigned to
the “FRNT” display item for the
front loudspeakers or “REAR” for
the rear loudspeakers.
➮
Press the softkey
4
assigned to
the “VIEW” display item.
If you want to select the equalizer view
without equalization,
➮
press the joystick
7
repeatedly to
the left or right until “PRE EQ” ap-
pears in the display.
The equalizer setting is displayed.
If you want to select the equalizer view
with equalization,
➮
press the joystick
7
repeatedly to
the left or right until “POST EQ” ap-
pears in the display.
The equalizer setting is displayed.
To close the view,
➮
press the joystick OK
7
or the
MENU button
8
.
Adjusting the graphic equalizer
manually
You can also manually adjust the auto-
matically ascertained values of the
graphic equalizer.
➮
Press the DSA button
5
.
➮
Press the softkey
4
assigned to
the “USER” display item.
➮
Press the softkey
4
assigned to
the display item of the equalizer
that you want to set up.
➮
Press the softkey
4
assigned to
the “ADJ” display item.
You can adjust the equalizer for the front
and rear loudspeakers separately.
➮
Press the softkey
4
assigned to
the “FRNT” display item for the
front loudspeakers or “REAR” for
the rear loudspeakers.
The graphical equalizer settings are dis-
played.
To select the frequency,
➮
press the joystick
7
to the left or
right.
➮
Adjust the level for the frequency
by moving the joystick
7
up or
down.
The values appear graphically in the
display whilst you are adjusting the
equalizer.
➮
Adjust all the settings for both
channels as described above.
➮
Press the joystick OK
7
or the
DSA button
5
to close the menu.
The settings are saved.
DSA - EQUALIZER
Summary of Contents for SAN FRANCISCO CD72
Page 2: ...2 Open here...
