Blaupunkt Radio Basic, Operating And Installation Instructions

Page: 14 / 364

14
Bluetooth®
If no connection to a Bluetooth® device exists,
쏅
press the button
=
to activate the pair-
ing mode.
The display shows "PAIRING" the currently
stored PIN (default "1234"). In addition, the
Bluetooth® icon fl ashes. The car sound sys-
tem can now be recognised by a Bluetooth®
device for approx. 2 minutes and connected.
쏅
Select the car sound system (Bluetooth®
name: "BP PROFESSIONAL") from the device
list of your Bluetooth® device to establish the
connection.
쏅
If necessary, enter the PIN displayed by the car
sound system at the Bluetooth® device.
The display may briefl y show "PAIRED", fol-
lowed by "CONNECTED", as soon as the car
sound system and the Bluetooth® device have
been paired and connected.
Notes:
• If no connection can be established, the
display briefl y shows "CONNECT FAILED".
• If no connection can be established to the
previously connected Bluetooth® device
after switching on the car sound system,
the display briefl y shows "NO DEVICE".
• After switching on, the car sound system
automatically attempts to reconnect the
previously connected Bluetooth® device.
During this time, the Bluetooth® icon
fl ashes.
Telephone functions
Answering/rejecting an incoming phone call
With an incoming call, the display alternately
shows "IN CALL" and the number of the caller. The
current audio source is muted and a ring tone is
played via the loudspeakers of the car sound sys-
tem.
Note:
If the number of the caller is not being trans-
mitted, the display shows "IN CALL" instead
of the number. If the number of the caller is
stored together with a name in the car sound
system, the name of the entry and the num-
ber are displayed (see the section "Storing a
phone number in the car sound system" in
this chapter).
쏅
Press the button
=
to answer the call.
"CALL" and the duration of the ongoing call
are displayed.
쏅
Press the button
>
to reject the call or
to end the current call.
The display shows "END CALL".
Notes:
• During the call, you can adjust the volume
with the volume control
4
or mute the
microphone and the loudspeakers with a
short press of the On/Off button
2
.
• You can preset the minimum volume for
the call playback in the user menu (see
the chapter "User settings", section "Mak-
ing settings in the " VOLUME" menu", menu
item "TEL VOL").
Making a call
쏅
In the Bluetooth® menu, select the "DIAL NEW
NUMBER" menu item.
쏅
Press the button
7
to open the entry
menu.
You can now enter a phone number with up
to 20 digits:
쏅
Turn the volume control
4
to select a digit
for the respective position.
쏅
Press the or button
7
to reach the next
or previous position.
Notes:
• You can also reach the next position by
pressing the ON/Off button
2
.
• While entering the phone number, you
cannot change the volume or mute the car
sound system.
쏅
Press the button
=
to call the number
entered.
"CALLING" and the dialed number are alter-
nately shown on the display.