19
Step 2
Refer to the device menu and press the test button in order to transmit a test signal. When the signal is received,
the Control Panel will emit a beep to indicate this. The webpage will be updated and will show the device info
and the signal strength in the column named RSSI. Signal strength of 9 is Excellent, with signal strength of 0 the
signal is absent. If no signal is received, please change the device’s mounting location and test again. For the IP
Camera, the signal will be sent automatically upon entering the Walk-Test mode, so it does not require pressing
a button.
4.7.4 Refresh Device List
Click the icon to refresh the device list info.
4.7.5 Delete Device
To remove learnt in devices, first click the icon to access the Delete Device menu.
Check the box at end of the device column and click OK to
remove the selected devices from the panel.
Summary of Contents for Q SERIES
Page 34: ...34 About...
