32
Switching RDS time signal on/off
The time can be synchronised with the time data trans-
mitted via RDS.
쏅
In the radio menu, press the
[
]
button.
쏅
In the options menu, press the
RDS CT
button to
change the setting.
쏅
Press the
[
]
button.
The radio menu is displayed again.
Optimising radio reception
The HICUT function causes a reception improvement in
case of poor radio reception (in FM radio mode only). If
reception interferences exist, the interference level is au-
tomatically decreased.
쏅
In the radio menu, press the
[
]
button.
쏅
In the options menu, press the
HICUT
button to
change the setting.
쏅
Press the
[
]
button.
The radio menu is displayed again.
Switching the REG function (regional
programmes) on/off
Some RDS stations divide their programmes into region-
al programmes with diff erent contents at certain times.
If the REG function is activated, the car sound system
changes only to those alternate frequencies of the set
station on which the same regional programme is being
broadcast.
쏅
In the radio menu, press the
REG
button to switch
the REG function on or off .
The
REG
button is illuminated if the REG function is
switched on.
Switching the AF function (alternative
frequencies) on/off
If the AF function is activated, the car sound system auto-
matically tunes into the best receivable frequency for the
station that is currently set.
쏅
In the radio menu, press the
AF
button to switch the
AF function on or off .
The
AF
button is illuminated if the AF function is
switched on.
Adjusting the seek tuning sensitivity
The seek tuning sensitivity decides whether the auto-
matic station seek tuning fi nds only strong stations or
also weaker stations that may be noisy.
쏅
In the radio menu, press the
Loc
button to set the
sensitivity of the station seek tuning.
If the
Loc
button is illuminated, the seek tuning lo-
cates only strong stations.
Selecting the programme type and
starting seek tuning
You can select a programme type with the PTY function
to purposefully search for stations, for example, that
broadcast rock music or sport events.
쏅
In the radio menu, press the
[
]
button.
쏅
In the options menu, press the
PTY List
button to
display the programme types.
쏅
Select the desired programme type with the
[
]
or
[
]
button.
쏅
Press the
[
]
button to start PTY seek tuning.
If a station broadcasts a programme with the select-
ed programme type, this station is played back.
Traffi
c information
In the reception region Europe, an FM station can iden-
tify traffi
c announcements via an RDS signal. If priority for
traffi
c reports is switched on, a traffi
c report is automati-
cally switched through, even if the car sound system is
currently not in radio mode.
Note:
The volume is increased for the duration of the
switched-through traffi
c announcement. You can ad-
just the minimum volume for traffi
c announcements.
Switching priority for traffi
c announcements on/off
쏅
In the radio menu, press the
TA
button to switch the
priority for traffi
c announcements on or off .
The
TA
button is illuminated if the priority for traffi
c
announcements is switched on.
Setting the minimum volume for traffi
c
announcements
쏅
In the radio menu, press the
[
]
button.
쏅
In the options menu, press the
TA VOL
button.
쏅
Adjust the desired volume with the
[
]
or
[
]
but-
ton.
쏅
Press the
[
]
button.
The radio menu is displayed again, the set volume
is stored.
Radio mode
02_Philadelphia845_gb.indd 32
02_Philadelphia845_gb.indd 32
27.08.14 14:10
27.08.14 14:10
