background image

49

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

Storing the display mode

You can store your preferred display mode
which will then be active each time the ra-
dio is switched on.
If required,

press DIS as many times until the de-
sired setting is displayed.

Hold down the DIS button until you
hear a beep.

SCAN operation

Use this function to scan all of the CD tracks.

To start the Scan function:

Press SC.

The titles will be scanned one after the oth-
er in ascending order.

To stop the Scan function:

Press SC briefly.

The track currently being scanned is con-
tinued to be played.

SCAN will also be terminated by

pressing one of the buttons AUD,
GEODSCSRC

, << >> or  .

Entering CD names

You can name up to 99 discs.
The specified name (e.g. VIVALDI) will then
appear in the display.
Be sure to select the display mode “NAME”
using the DIS button.

To start the entry:

Press the DSC button.
“CDC-NAME” will be displayed.

Press 

.

The first underscore character will flash.

Select the first character with the help
of the rocker switch  .

You have the choice between the capital
letters A to Z, special characters and the
numbers 0 to 9.

Use the rocker switch << >> to move
to the next underscore and select a
character.

You can select up to seven characters.
Once you have completed the name as de-
sired:

Press 

 in order to store it.

To quit the naming mode,

leave the DSC menu by pressing DSC.

If you would like to name another CD,

select a new disc.

You can change any existing name by en-
tering and storing a new one (overwriting).

Deleting CD names with
DSC-UPDATE

You can delete a CD name with the help of
the DSC update function. Use “CDC UPD”
to confirm all of the CDs for which the spec-
ified name is not to be deleted.

Insert a magazine with CDs for which
the stored information is to be main-
tained.

Press the DSC button.

Press  /  to select “CDC UPD”.

Press << >>.

After the update has been completed,
“NEXT MAG” appears in the display.

Press the   button on the changer for
approximately two seconds.

The magazine will eject.

Insert the next magazine.

Proceed as described above for all of the
CDs/magazines for which the entered name
is to be maintained.

After having updated the last maga-
zine, press 

.

To quit the function,

press DSC.

The system has saved the name informa-
tion for all of the CDs which were inserted.
For all other discs the CD names have been
deleted.

 Orlando DJ A gb®

13.05.2002, 11:12 Uhr

49

Summary of Contents for Orlando DJ





























Reviews: