Blaupunkt New York RDM 127 Operating Instructions Manual Download Page 49

Page: 49 / 70

CD - Betrieb (Option)

DEUTSCH

ENGLISH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

Repeat a CD or a track (REPEAT)

You can repeat any CD or track (continuously).

Select the changer functions menu. If necessary,
•

press CDC.

•

Press

REPEAT

until the desired function appears briefly in the display

header.

REPEAT TRACK

– The track selected will repeat (continuously).

REPEAT DISC

– The CD selected will repeat (continuously).

REPEAT OFF

– REPEAT has been switched off.

REPEAT

is no longer

highlighted in the display. CDs and tracks will play back
in numerical order.

TPM

Track programme memory

To store and play back favourite CD tracks.

It is possible to catalogue up to 99 CDs with a maximum of 20 tracks each.

The set ist equipped with a central memory. The TPM programming applies to
both the CD and the CDC mode.

To store, select the changer functions menu. If necessary,
•

press CDC.

Storing a track with TPM

The TPM function must be switched off (

TPM

is not highlighted in the display).

If necessary,
•

switch TPM on/off by pressing

TPM

•

Select the CD and the track by pressing << / >> and / . The CD and the
track number will appear in the display header.

REPEAT

TPM
TPM CLR

CDC NAME

REPEAT TRACK

MIX
SCAN

TIME

BA NewYork gb®

24.05.2002, 11:59 Uhr

Summary of Contents for New York RDM 127







































































Search results

Summary of Contents for New York RDM 127

Reviews:

Related manuals for New York RDM 127

Brands by name

Popular brands

Blaupunkt New York RDM 127, Operating Instructions Manual

Search results

Summary of Contents for New York RDM 127

Reviews:

Related manuals for New York RDM 127

Brands by name

Popular brands