background image

30

To programme the mute volume level,
proceed as follows:

Adjust the desired volume.

Press 

 for two seconds until you

hear a beep.

Now this volume level is stored as your
mute volume.

Extra function 
Memory button in the DSC menu.

4

FM
To select one of the FM memory banks
I and II.
To change the memory bank:
Press FM.
“FM I” or “FM II” will appear on the dis-
play panel.

5

TS - Travelstore
To store the six most powerful stations
automatically with Travelstore:
Store: Press TS until seek tuning
starts in the display.
Recall: Press TS. “T” is indicated in
the display. Then briefly press one of
the preset buttons 1-6.

Switching on with the ignition being
switched off:
To keep on operating the set when the
ignition is switched off (KeyCard is in-
serted), proceed as follows:
Press ON after the double beep tone.
The unit will be turned on.
To avoid that the battery goes flat, the
system will be turned off automatically
after a playback time of one hour.

2

VOL+ / VOL-
To alter the volume.
Each time the set is switched on, it will
play with the pre-adjusted volume
(VOL FIX).
You may also change the VOL FIX set-
ting (see chapter “DSC programming”).

3

For instantly muting the volume.
By pressing the 

 button the volume

will be muted immediately. “MUTE” will
appear in the display.
The function is cancelled by pressing
button 

 or VOL+.

When pressing VOL-, the normal vol-
ume will be by one grade lower than
the mute volume.

Quick reference

1

Switching on/off with the ON button:
Press ON.
When switching the set on with the ON
button, the KeyCard has to be insert-
ed. The unit will play with the pre-ad-
justed volume.

Switching on/off with the KeyCard:
The set has to be turned on via the ON
button.

Note:
Read the information in chapter
“KeyCard theft protection system”.

Switching on/off via the ignition:
When connected correspondingly, the
set can also be turned on and off via
the vehicle ignition.
After the ignition has been switched
off, a double beep tone will remind you
that you should remove the KeyCard
before leaving your vehicle.

 München RDM126 gb®

03.05.2002, 10:33 Uhr

30

Summary of Contents for MUNCHEN RDM 126






























Reviews: