Blaupunkt MSR801, Owner'S Manual, Page: 7 / 76

5
Select the appropriate limit comb (cut hair length is indicated on the side of the limit comb). Place the
limit comb on the hair shaver.
Switch the shaver on with the On/Off button. Slowly move the appliance over the hair. It is
recommended to shave “against the grain”, against the direction of the hair growth.
Note: Make sure you remove any excess cut hair from the limit comb.
Having finished clipping, remove all hair from the trimming head.
HAIR CLIPPER CLEANING
Prior to cleaning the appliance, ensure that it is switched off and not being charged.
Clean the limit combs under running water.
Remove the limit comb of the trimmer. Remove the trimming head by pressing down gently on the
blades, as shown in figure 3. Clean the parts under running water.
It is recommended that a little machine oil is applied onto the cleaned blades.
MSR801