2. Press the eject button to open the CD door, and load the CD disc ; press the eject button again to close the CD door. The unit
will start to read and play the CD automatically.
3. Create your own playlist ( max programmed 20 track for CD and MP3 disc, and up to 99 tracks for WMA/MP3 disc)
a. In CD playback mode, press the stop button first, then press program button to start the program operation.
b. The display will show “ PXX XXX”, press the previous/next or 10+ button to select the track that you want to be programmed,
and press the program button again to confirm.
c. Then the display will show the programmed track and skip to next program track setting. For example, “P01 006” means the
number 6 track was programmed as the number 01 track.
d. Repeat the above step b and C to set up rest track till the display show “ FULL”.
e. Then press the play button to start the playing of programmed track.
f. To cancel and remove the programmed playlist, press the stop button again, or eject the CD disc.
4. You can also achieve the play and pause, stop, mute, repeat and random, track selection, EQ, fast-forward and fast-rewind
function, introduce etc. during CD playback. Please reference the general operation part on this manual.
FM radio operation
Before start the FM radio listening, please full extent the FM antenna or move the unit next to the window in order to get better
FM reception.
1. Auto scan and preset radio station:
Press the source button repeatedly to enter the FM radio mode; short press the search
button from remote control or play/pause button on front panel to scan and save the available radio station automatically. The
unit can save up to 40 (max) preset stations. Short press the previous and next button from remote control or front panel of
main unit to pick up the preset station.
2. Manual tune or auto scan:
short press the FF+/- button to increase or decrease 0.05MHz frequency per step base on the
current station; press and hold the FF+/- button, or previous/next button on front panel 2 seconds to auto scan the available
FM station in upward or downward frequency, and will stop and play the available station automatically.
3. Station memory manually:
when you tuned a favorite station by manual tune or auto scan which you desire to save; press
the memory button from remote control first, then the preset station digits will flare on display, press the previous and next
button to switch the preset station location that you desire to save; Then press the memory button to confirm it; and the
current FM station will be saved. Please repeat the operation to save other station. The unit will expand and add a new preset
number automatically base on current preset station in case of you press the memory button for manual saving.
Notes: the unit will show the available preset station only.
USB operation
The product includes USB playback function which can decode and play the music from a USB storage device. Before start the
operation, please copy the MP3/WMA format music into a USB stick. The max supported USB stick device is up to 32 GB.
1. Before start the USB playback, please make sure the USB stick was plugged properly into the USB port. Then switch to USB
playback mode by press the source or CD/USB button. Then the unit will decode and start to play the music automatically after
few seconds.
2. In USB mode, you can achieve the play and pause, stop, mute, repeat, track selection, EQ, fast-forward and fast-rewind
function etc. Please reference the operation from the general operation part on this manual.
Notes:
a. Connect the USB stick by a USB extension cable for playback is not recommended which may produce noise or intermittent
sound due to audio data loss during transfer.
b. Decode and playback all MP3/WMA format music is not guaranteed.
c. The max supported USB device is 32GB.
d. Some USB sticks may take a little long time to playback; please kindly note this is not malfunction.
AUX IN/line in/MP3 link and headphone operation
In order to wire connection and playback the music from other player or source, please follow up below operation.
1. Using the supplied audio cable( 3.5mm stereo to RCA) connect the LINE IN jack(RCA type) on rear panel of main unit, and the
another 3.5mm stereo connector connect with line-out or headphone jack of outsourcing player. Then switch to LINE IN mode
by pressing the source button.
2. Select the music and play on your player, then the sound will output from the micro system.
3. In AUX IN playback mode, the main control is on the outsourcing player side. But you also can control the volume, EQ and
mute the sound on the micro system side.
Headphone:
plug the headphone connector into the headphone jack on front panel, then the sound will silence in micro
system, but output from the headphone. Adjust volume setting on micro system or headphone to get the comfortable sound
level for listening.
Line out:
using the supplied audio cable ( 3.5mm stereo to RCA) connect the LINE OUT jack(RCA type) on rear panel of main
unit, and the other terminal connnect with AUX IN jack of outsourcing active speaker. Select and play the music on the micro
system side, then there will have sound output both on the micro systen and outsourcing active speaker.
7
MS6BK