Digital input operation
The unit includes optical and HDMI(ARC) digital input, which allows you to digital connect it with TV or other devices for audio
playing.
Optical input:
Using an optical cable(not include) connect the optical output port from TV or other device, and another
terminal connect with micro system. Short press the mode button repeatedly to switch and enter to optical input mode. Check
and adjust the volume level both on micro system and your TV device, select and play your desired enjoyable content, then you
will get sound output from micro system.
HDMI(ARC):
The micro system supports HDMI with ARC(audio return channel); if your TV is HDMI ARC compliant(please check
your TV spec for detail), then you can enjoy the TV audio from micro system. Using a HDMI cable(not include) connect micro
system and your TV, short press the mode button repeatedly to enter HDMI mode, or there will switch to HDMI mode
automatically once your TV is turn on and connection successfully. Check and select the volume level, select and play the
content from your TV, then you will get the sound output from micro system.
Important notes
a. In digital input(optical and HDMI ARC) play mode, please set up audio output mode as “ PCM stereo” or “ stereo 2.0” on your
TV(detail reference your TV's manual), otherwise, they probably no sound output
b. Please make sure your TV includes and supports HDMI ARC. The TV may have several HDMI port, but please check and
connect HDMI ARC output port properly, normally there will include HDMI ARC text next to the port (please check your TV
manual or spec).
c. When you select and buy HDMI cable for connection, please make sure the HDMI cable can support HDIM V1.3 and above, and
it is 19-cores matching cable.
d. In case of no sound or intermittent output, please double check above notes, and make sure there will have correct and
proper connection between micro system and other device.
e. In digital input play mode, you can achieve volume adjustment/EQ setting/mute function etc. from remote controller.
AUX IN/line in/MP3 link operation
In order to wire connection and playback the music from other player or source, please follow up below operation.
1. Using the supplied audio cable( ( 3.5mm to 3.5mm stereo) ) connect the LINE IN jack((3.5mm stereo type) on rear panel of
main unit, and the another 3.5mm stereo connector connect with line-out or headphone jack of outsourcing player.Then
switch to LINE IN mode by pressing the source button.
2. Select the music and play on your player, then the sound will output from the micro system.
3. In AUX IN playback mode, the main control is on the outsourcing player side. But you also can control the volume, EQ and
mute the sound on the micro system side.
Clock time and alarm (playback wake up and auto play) setting
The unit includes clock time and alarm setting which allows you to enjoy the entertainment base on a personal wake up time,
and the music will start to play automatically when the setting time is coming on.
1. Clock setting:
in standby mode, press and hold the clock button few seconds from remote control to start the setting, and 24
hours time format will flare on display; press c / - button to select the 12/24 time format, and press the clock button
again to confirm your selection; then the hour digits will flare on display ; press c / -button to adjust the hour, and
press the clock button again to confirm; then the minute digits will flare on display, press c / - button to adjust minute,
then press clock button again to confirm and finish the clock setting.
2. Playback wake up (alarm) time setting:
in clock time interface, press and hold alarm button from remote control few
seconds to start the setting, then the alarm source CD/USB/FM will show on display; press c / - button to select the
alarm source, and press the alarm button again to confirm; then skip to rest setting of the hour/minute/waking up volume
which is similar operation to alarm source , press alarm button again to confirm and finish the selection.
Notes:
a. The clock and alarm time setting is only available when the main power is remained. Please re-set up the setting in case of
power interrupted.
b. The ““alarm icon”” will show on display after the alarm time setting successfully. Short press the alarm button in standby
mode can turn off the alarm setting, short press it again can review the alarm setting.
c. When the alarm time is on, the unit will playback (CD/FM radio/USB) automatically, you can press the standby button to turn
off the playback.
8
