Device must be used in a way that compliments
safety of the user when driving the vehicle. It is
recommended for the user to install at an
appropriate location when operating the device.
While driving, user is not recommended to use
applications that can be prone to distraction.
Before installation, disconnect the negative terminal
of the battery. Refer to the safety vechicle
manufacturer’s user manual.
Ensure positions of the holes are nowhere near the
vehicle component to avoid any damage during
drilling.
Ensure corss section of the cables i no less than
2.5mm if the positive and the negative cables are
too long. incorrect installation may result in
malfunction of the device or the car sound system.
Select a dry and well-ventilated location to install
the device.
The device must not be installed in overly exposed
location.
The installation location must be suitable for screw
holes and stable ground support
User is advised to keep the volume of the car radio
to a moderate level for the protection of the ears
and to increase the ability to hear any emergency
warning signals (e.g. police and ambulance sirens).
Do not increase the car radio volume while the car
radio is muted as it is not audible. The car radio
volume can be too loud when the car radio is
unmuted.
CAUTIONS
This device has been manufactured according to
established safety guidelines. However, dangers may still
occur if the safety notes in this manual is not observed.
This manual is intended to familiarize the user with the
device’s important functions. Read this carefully, prior to
using the car radio. Keep this manual in an easily
accessible location. In addition, do observe the
instructions of other devices used in conjunction with
this device.
Installation Safety Notes
Always observe the following safety notes:
•
•
•
•
•
•
•
General Safety Notes:
Observe the following for protection against injuries:
•
Disclaimer
•
•
•
Voltage Supply
•
•
•
•
Compatible PC OS
•
Scope of Delivery
•
•
•
•
•
•
•
Blaupunkt is not liable for any loss or damage
caused or resulting from unauthorized disassembly
or modification to the product.
In no event shall Blaupunkt be liable for any direct,
indirect, punitive, incidental, special consequential
damages, to property or life, improper storage,
whatsoever arising out of or connected with the use
or misuse of our products.
USA & CANADA : Products not intended for
sales in the United States and Canada. If
purchased in the U.S. or Canada, this product
is purchased as-is. No warranty, expressed or
implied is provided in the U.S. and Canada.
+12V : Positive connection terminal for car 12V
power supply.
GND : Power supply negative connection terminal.
Firmly and carefully connect the ground lead to a
bare metal point ont he vehicle chassis.
Operation temperature : 0° - 70°C
With or higher than PC OS Windows XP, 1.5GHz, 1GB
RAM processor speed, 1024x600 resolution
DSP Signal Interface Processor (163 x 378 x 47mm)
5.0m USB cable
Control High Level Input
4 of 4x15mm / 8 of 3x6mm self-tapping, screws
DSP 1.0 SW CD or visit www.blaupunkt.com/ase to
download (Windows only)
Digital Remote Control (DRC) Control Panel
(Optional)
5.0m DRC AC Link Cable
1
