Troubleshooting
TECHNICAL SPECIFICATION
Specifications subject to change without notice.
10
PROBLEM
REMEDY
No Sound
Adjust the volume
Connect the AC adaptor properly
Make sure your Bluetooth device has A2DP profile.
Check if both devices are paired and connected over Bluetooth.
Make sure there isn’t a 3.5mm cable connected to the aux input on
the back of the speaker.
Restart the UniStream to auto-connect with your Bluetooth device.
Music is not streaming over Bluetooth
Music doesn’t resume hanging up
a call
Press play to resume music.
1. General
Dimensions of main unit 220
Weight of main unit 1.3
2. Amplifier
Power Output 10Wrms X 2
3. Speaker system
Impedance 8
4. AUX IN
Input
Max voltage
Impedance
Power AC/DC Adaptor Input: AC 100-240V ~ 50/60Hz
Output: 16V 1.8A
Max power consumption 35W
mm(L) x 55mm(W) x 130mm(H)
Kgs
Ω 2" Speaker x2
3.5mm
1 V
47 KΩ
Φ
Ensure that you read all of the safety instructions before using this unit.
MONACO
TROUBLESHOOTING AND TECHNICAL SPECIFICATION
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult you retailer or service
professional.
WARNING: under no circumstances should you try to repair the set yourself, as this would invalidate the
warranty.
