37
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
KeyCard theft protection system
Operating the unit
•
Turn on the set.
With the KeyCard tongue protruding
out of the unit, insert the KeyCard into
the slot with the contact area facing
up in the middle of the area.
The car radio is now ready for operation.
If a wrong KeyCard is inserted, then “CARD
ERR” will appear in the display. In this case
please do not make any further adjustments.
The system will switch off by itself after ap-
proximately 10 seconds.
If another card type is inserted (e.g. phone
or credit card), the display will show
“WRONG KC” for approximately 2 seconds.
Remove the wrong card and insert the cor-
rect KeyCard.
After the display indications “CARD ERR”
or “WRONG KC”:
•
Press ON to turn on the set.
Removing the KeyCard
•
Pull the KeyCard forward and remove
it.
“Training” a second KeyCard/
Replacing a KeyCard
When the unit is operated with the first Key-
Card, you can “train” a second one which
can also be used with the set.
To “train” a second KeyCard:
•
Insert the first KeyCard and turn on the
set.
•
Press the DSC button and select
“LEARN KC” by pressing / .
•
Press << or >>.
The display will switch to “CHANGE”.
•
Remove the first KeyCard and insert
the new one while “CHANGE” still ap-
pears in the display.
After the display indication “READY” or
“LEARN KC”,
•
press DSC.
Now you can also use the new KeyCard to
operate your car stereo.
A maximum of 2 cards can be used for the
set.
If you attempt to “train” a third one, the ac-
cess authorisation for the KeyCard not used
for the “training” process will be deleted au-
tomatically.
This car radio includes one KeyCard as
standard equipment, but it can also be op-
erated with a second card.
If you have lost your KeyCard or if it was
damaged, you can buy a new one from your
specialised dealer.
If you use 2 KeyCards, the settings stored
on the first card will be transferred to the
second. However, you can store the follow-
ing functions individually for each card:
Preset button assignments, bass, treble,
balance and fader settings, Loudness, TA
(traffic announcement volume), beep vol-
ume, LOW-EQ, HIGH-EQ.
In addition, the settings which are activated
before you switch the radio off, such as the
waveband, station, TA priority, AF, REG ON/
OFF, SCANTIME, seek tuning sensitivity,
VOL FIX and SHARX will also remained
stored.
This ensures that you will find your basic
settings re-adjusted automatically as soon
as you have inserted your KeyCard.
