Blaupunkt MEMPHIS DJ, Operating Instructions Manual

Page: 4 / 16

Memphis DJ
18
KeyCard
This car radio can be operated only with a
KeyCard the code of which is stored in the
set.
Switch the set on with button
1
and com-
pletely insert the KeyCard in the predetermi-
ned position
E
.
If an incorrect KeyCard is inserted, “----” is
indicated in the display.
In such a case, carefully read the instructions
under “Theft protection”.
Never pull out the KeyCard. First push in the
KeyCard (card is transported into playing
position), then remove it.
If your KeyCard gets lost or damaged, one of
the Blaupunkt service locations will help,
provided you present the car radio passport.
These service locations are marked ( ) in
the car radio service register. If necessary
call the service center of your country for
detailed information about your local service
workshop.
Front Panel Description
This quick guide to operation consists of four
parts:
Tone control
Radio operation
Cassette operation
CD operation
Twin functions are described separately. All
functions which require more information are
additionally described in chapter “Notes on
operation”.
1
On/off knob - Scan
On/off
Turn the knob to switch on (“CARD” is
shown in the display). If no KeyCard is
inserted, the set switches off automati-
cally after 10 sec.
To switch on or off, simply insert or
push against the KeyCard.
SCAN
By pressing SCAN, the receivable stati-
ons of the activated waveband (FM,
AM) are searched and played for a
short time.
E
Inserting the KeyCard
Insert the KeyCard in the direction of
the arrow in the predetermined position.
Push against the card to remove the
KeyCard.
Tone control
1
Volume control
2
GEO (balance and fader control)
Press button - the display
D
a shows
BAL (balance) or FAD (fader) and a
number between -9 and +9.
Balance: Use rocker switch << >>
G
to adjust the left/right volume.
Fader: Use the rocker switch /
F
to adjust the front/rear volume.
3
Sound adjustment (TREB, BASS)
TREB - for treble adjustment
Press TREB -
the display
D
a shows TRE and a
number between -6 and +6. Use the
rocker switch << >>
G
to adjust treble.
BASS - for bass adjustment
Press BASS -
the display
D
a shows BAS and a
number between -7 and +7. Use the
rocker switch << >>
G
to adjust bass.