Blaupunkt LS 178-1, Instruction Manual

Page: 43 / 56

PREPARATIONS
Prepare the Remote Control
The provided remote control allows the unit to be operated from a distance.
• Even if the remote control is operated within the effective range (6m), its operation may
be impossible if there are any obstacles between the unit and the remote control.
• If the remote control is operated near other products which generate infra-red rays, or if
other remote control devices using infra-red rays are used near the unit, it may operate
incorrectly. Conversely, the other products may operate incorrectly.
Battery Installation
1. Remove the battery compartment cover.
2. Insert two “AAA” size (R03 or UM-4) dry batteries. Make sure that the batteries are
inserted with their positive “ ”±and negative “ ” poles positioned correctly.
3. Close the cover.
Precautions Concerning Batteries
• Be sure to insert the batteries with correct positive “ ” and negative “ ” polarities.
• Use batteries of the same type. Never use different types of batteries together.
• Either rechargeable or non-rechargeable batteries can be used. Refer to the precautions
on their labels.
• If the remote control is not to be used for a long time (more than a month), remove the
batteries to prevent from leaking.
• If the batteries leak, wipe away the leakage inside the battery compartment with a paper
towel and replace the batteries with new ones.
• Do not use any batteries other than those specified. Do not mix new batteries with old
ones.
• Do not heat or disassemble batteries. Never throw them in fire or water.
• Do not carry or store batteries with other metallic objects. Doing so could cause
batteries to short circuit, leak or explode.
• Never recharge a battery unless it is confirmed to be a rechargeable type.
42
LS 181