Blaupunkt HDD301, Owner'S Manual

Page: 9 / 116

HDD301
7
1. Concentrator nozzle
2. Folding handle
3. Inlet filter
4. Power switch
OPERATION
Connect the power cord to the the power supply.
Set the desired heat and airflow level using the switch (4):
0 - Off
(*) - Cool shot
1 – Lower heat and airflow level
2 – Higher heat and airflow level
After the completion of drying hair, disconnect the device from the
power by removing the plug from the socket.
CLEANING AND MAINTENANCE
Before cleaning, make sure that the dryer has been disconnected from
the power supply.
The hair dryer housing may be wiped with a slightly damp cloth, then it
should be immediately wiped dry. Do not allow water to enter into the
hair dryer.
It is recommended that dirt be removed from the inlet filter regularly as
it can block airflow.