13
ENGLISH
FRANÇAIS
ESP
AÑOL
POR
TUGUÊS
NEDERLANDS
SVENSKA
ESP
AÑOL
POR
TUGUÊS
Radio Operation
Switching to Radio Mode
If the car radio is in another operating mode:
➮
Press the TUNE button,
>
.
RDS Function
This device is equipped with an RDS radio
receiver. Some FM stations transmit a signal
in addition to the program itself containing
information such as the name of the station
and the type of program (PTY).
If RDS is activated, the station name is dis-
played as soon as it is received. The program
type can also be displayed if required. Read
more about this in the section on “Program
Type (PTY)”.
Switching RDS on and off
To use the RDS function:
➮
Press the TUNE button,
>
, when the
radio is operating.
The radio function menu is shown on the dis-
play.
➮
Press the softkey,
4
, indicating “RDS”.
The RDS function is active if “RDS” is dis-
played with light and shade reversed. When
RDS is switched on or off, “RDS ON” or “RDS
OFF” appears briefly in the display.
To return to the basic radio menu:
➮
Press the TUNE button,
>
, or wait for
eight seconds. The settings are then
saved.
Tuner Alternative
Using the TA function (Tuner Alternative), the
device automatically searches for the best fre-
quency on which the current RDS station can
be received.
Switching TA on and off
To use the TA function:
➮
Press the softkey,
4
, indicating “TA”.
The TA function is active when “TA” appears
in the display with light and shade reversed.
To deactivate the TA function:
➮
Press the softkey,
4
, indicating “TA”
again.
Select Waveband/Memory Level
This radio can receive FM and AM stations.
Three memory levels are available for the FM
waveband (FMI, FMII and FMT), and two
memory levels for the AM waveband (M and
MT).
Six stations can be stored in each memory
level.
Selecting the waveband
To switch between FM and AM:
➮
Press the TUNE button,
>
, when the
radio is operating.
The radio function menu is shown on the dis-
play.
➮
Press the softkey,
4
, indicating “BND”
until the desired waveband is shown in
the display.
To return to the basic radio menu
➮
Press the TUNE button,
>
, or wait for
eight seconds. The settings are then
saved.
Selecting memory level
To switch between the various memory lev-
els (FMI, FMII, FMT, AM, AMT):
➮
Press the softkey,
4
, indicating “NEXT”
until the desired memory level is shown
in the display.
The memory levels appear in the following
order: FM I, FM II, FMT, M (AM), MT (AMT).
RADIO OPERATION
