Safety Notes
This product has been manufactured according to
established safety guidelines. However, dangers may still
occur if the safety notes in this manual is not observed.
This manual is intended to familiarize the user with
the product’s important functions. Read this carefully,
prior to install the product. Keep this manual in an
easily accessible location. In addition, do observe the
instructions of the devices used in conjunction with
the product.
General Safety
•
•
•
•
•
•
•
•
•
This manual may be updated from time to time without
any notice.
CAUTIONS
Disclaimer
In no event shall Blaupunkt be liable for any direct,
indirect, punitive, incidental, special consequential
damages to property or life and whatsoever arising out
of or connected with the use or misuse of our products.
USA & CANADA: This product is not intended for sale in
the United States and Canada. If purchased in the U.S. or
Canada, this product is purchased on as-is basis. No
warranty, whether expressed or implied is provided in
the U.S. or Canada.
1
Headlamp is intended for installation and operation
in a vehicle with 12V vehicle system voltage and can
be used in headlights with H4 halogen lamps.
Ensure headlamp does not have defects before
installation.
Keep the headlamp away from children.
Keep the headlamp away from flammable areas
or liquids.
The headlamp should be stored in dry and low
humidity place.
Avoid skin contact with the high temperature/
working headlamp when replacing headlamp. Allow
headlamp to drop to room temperature before
replacing the headlight.
Do not modify product, or expose product to dust,
grease stains, or scratch the surface of the headlamp.
Do not look directly at the operating headlamp, it
may cause eye damage.
After installation, ensure below are working correctly
1. Correct light/beam pattern
2. Indicators are working
3. Wiring are connected correctly
4. Covers are installed back to the car correctly
