WIRING DIAGRAM
3
REMOTE CONTROL
YELLOW WIRE
BLUE/WHITE WIRE
NOT IN USE IN THIS TYPE OF INSTALLATION
NOT IN USE IN THIS
TYPE OF INSTALLATION
GREY/BLACK (-) & GREY WIRE (+)
SPEAKER RIGHT CHANNEL
OUTPUT WIRE
SPEAKER LEFT CHANNEL OUTPUT WIRE
WHITE/BLACK (-) &
WHITE WIRE (+)
FUSE
10A
BATTERY
12V
CONNECT BLACK WIRE (-) TO THE CHASSIS OF THE VEHICLE
CHASSIS GROUND
Use the supplied cable and wire harness to connect the outputs correctly by referring to Diagram 1 & Diagram 2.
Diagram 1 (High Level Input -Speaker Input)
Diagram 2 (Low Level Input -Speaker Input)
REMOTE CONTROL
YELLOW WIRE
BLUE/WHITE WIRE
RCA SIGNAL WIRE
AUDIO DEVICE CONTROL WIRE
CONNECT BLACK WIRE (-) TO THE CHASSIS OF THE VEHICLE
FUSE
10A
BATTERY
12V
CHASSIS GROUND
2
INSTALLATION
SPECIFICATION
Subwoofer
•
•
•
•
•
•
•
Amplifier
•
•
•
•
•
•
•
•
•
•
•
Speaker Size : 214.5mm x 135.0mm
Cone Composition : Aluminium
Magnet Type : Ferrite
Wired Remoted : Included
Enclosure Housing Material : Plastic & Aluminium
Enclosure Dimension (LxWxH) :280 x 200 x 74mm
Enclosure Net Weight : 2.89kg
Amplifier Technology : Class AB
Normal Output Power (RMS) : 110W
Max. Output Power : 250W
Sensitivity (In Car/1W) : 92dB
Signal / Noise Ratio (dB) : 91dB
Impedance : 2.2 +2.2 ohms
Frequency Response : 40Hz – 150Hz
Low Pass Filter (LPF) : 83Hz – 150hz
Voltage : 14.4 (10V – 16V)
Phase Switch : 0 deg / 180 deg
Automatic On/Off (Hi & Lo) : High Level Only
Accessories
•
•
•
•
•
Remote Controller : Wired Remote
Screws (Parker-Type) : 5 x 15mm
Screws (M-Type) : 4 x 8mm
2 x Mounting Bracket A : 72mm x 40mm
Wiring Hardness (300m DC Cord, High Level Input
Speaker Wires, Low Level Input Speaker Wires & Input
Plug Wires)
RCA SIGNAL WIRE
GREY/BLACK (-), GREY WIRE (+), WHITE/BLACK (-) & WHITE WIRE (+)