Blaupunkt GRT801, Owner'S Manual

Page: 7 / 80

5
1. heating plate
2. body
3. controller
4. thermostat knob
5. thermostat indicator light
6. drip tray
11. latch release button
7. grill handle
8. grilling plate handle
10. latch
9. lid
12. lid guide hinges
1. Before cleaning, disconnect the plug from mains and wait until device cool down.
4. Do not clean the heating plates with sharp, abrasive cloths or sponges, or use scouring powder
because they can damage the smooth non-stick coating of the plates.
1. Remove all the cardboards, papers, foils which secure the appliance and it’s parts.
BEFORE FIRST USE
It is recommended to turn on the device first to „burn it out”. Keep the appliance operate for few
minutes to get rid of manufacturing odour. Device could emit some smoke. That’s normal.
To remove the lid, open it to a vertical position and lift.
USING THE APPLIANCE
Prepare the necessary products.
1.
Place the hob on the body of the device. Connect the controller to the device. Set the thermostat
knob to 0.
2.
Connect the device to the power supply. Turn the thermostat knob to the desired temperature.
3. After the thermostat control lamp goes out, the device has reached a desired temperature and is
ready to work.
4.
Place the ingredients evenly on the plate.
5. The thermostat indicator light will turn on and off while the device is operating. Thermostat
will keep the right temperature.
6.
The processing time of the products is on average from 10 to 30 minutes and depends on the
CLEANING AND MAINTENANCE
2. Clean the device with suggestion mentioned in chapter CLEANING AND MAINTENECE.
In the fully closed position, the lid is snapped in using the latch. To release the latch, press the latch
release button.
3. To clean stubborn remains spread a small amount of cooking oil, and after a few minutes, gently
remove it with a wooden spatula.
LID INSTALLATION AND OPERATION
ingredients and taste preferences.
ATTENTION: Be careful when processing food, hot steam may come out or hot grease may splash.
7.
Remove prepared dishes only with a wooden or plastic spatula.
8. After grilling, unplug the appliance from the socket and put the appliance away to
cool down.
To install the grill lid, slide it into the hinges vertically. You can open and close the lid by moving it in
the guides (as shown in the figure) You can also lock the lid in an open position.
2. Clean with dump cloth, then dry with dry cloth or paper towel.
5. Do not immerse the controller in water. Other elements can be washed under running water.
GRT801