background image

26

6

AF
A
lternative frequency during RDS op-
eration:
When “AF” lights up in the display, the
system will automatically seek a fre-
quency offering better reception for the
same RDS programme.
AF on/off: Press AF briefly.

Regional function on/off:
Press the AF button for approximately
1 sec. until you hear a beep. “REG-
ON” or “REG-OFF” will appear in the
display (see “REG - regional pro-
gramme”).

7

TA (Traffic Announcement)
If “TA” lights up in the display, the sys-
tem will play traffic stations only.
Priority on/off: Press TA.

8

1, 2, 3, 4, 5, 6 - preset buttons
You can store six stations on each of
the memory banks I, II and T.
To store a station: Press a preset
button during radio operation until you
hear a beep.
To recall a station: Select the desired
memory bank and press the relevant
preset button briefly.

Extra function of preset buttons

Coding: Please read first the informa-
tion in the section on “Theft protec-
tion”.
Button 1, 2, 3, 4 - to enter the four-digit
code number.
Press each button as many times as
necessary until the four-digit code not-
ed in your car radio pass appears in
the display.

To store and recall a PTY programme
type.
If PTY is active (“PTY” lights up in the
display), you can store and recall one
programme type on/from each preset
button on FM.

In cassete mode, you can use preset
button 1 for tape equalisation (type of
tape).

9

SRC (source)
You can switch between the radio and
tape audio sources (if a tape is insert-
ed).

Extra function of SRC button
lo
To select the seek tuning sensitivity
level:
Press button briefly.
If “lo” is displayed, the radio will only
pick up strong, local stations (normal
sensitivity).
If “lo” does not light up, the radio will
also pick up weaker, distant stations
(high sensitivity).

:

PTY (Programme Type)
In the PTY mode, the preset buttons
become programme type buttons. With
every preset you can select one pro-
gramme type, such as NEWS,
SPORT, POP MUSIC, EDUCATE, etc.

;

 / 

To switch the tape side: Press button
briefly.
To eject the tape: Press button for ap-
proximately 1 sec.

Extra function   / 
Frequency display during radio opera-
tion:
Press button briefly.
The frequency will appear briefly.

 Grana/Mala RCR127 gb®

02.05.2002, 13:06 Uhr

26

Summary of Contents for Granada RCR 127
























Reviews: