75
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Radio operation with RDS (Radio Data System)
•
Press TS briefly.
“T-Store” will flash in the display.
The six strongest FM stations will be auto-
matically stored on the memory bank “FMT”
(Travelstore). When this process has been
completed, the radio will play the station with
the strongest reception on station preset 1.
If desired, stations can also be stored man-
ually on the Travelstore bank (refer to the
section on “Storing stations”).
Recalling stored stations
You can recall any stored station at the touch
of a button.
FM
Recall the stations on the waveband select-
ed directly:
•
by pressing keys 1 - 6.
•
Press the desired preset button until
the radio resumes play after the muting
(takes approximately 2 sec.) or until
you hear a beep.
Now the station has been stored.
Note:
Should you tune into a station which has
already been stored before on another mem-
ory bank, the corresponding preset button
and the memory bank will flash briefly in the
DOT display.
Automatically storing the
strongest stations with Travel-
store
You can automatically store the six most
powerful FM stations in your current recep-
tion area sorted according to their signal
strength. This function is particularly con-
venient on longer trips.
•
Press TU, menu level 2 will appear in
the display.
To select a station on a different waveband:
•
Press NEXT as often as necessary un-
til the desired memory bank appears
and then select the station by pressing
keys 1 - 6.
MW, LW (AM)
You can select the stations stored for the
selected waveband directly:
•
by pressing keys 1 - 6.
To select a station on a different waveband:
•
Press NEXT as often as necessary un-
til the desired memory bank appears
and then select the station by pressing
keys 1 - 6.
Scanning stored stations with
Preset Scan
You can have all of the stored stations briefly
scanned on all wavebands and in the se-
lected FM memory bank.
To start Preset Scan:
•
Press TU and PS one after the other.
All of the stored stations on the waveband
selected and within reception range will be
scanned one after the other. “PS SCAN” and
the station name or frequency will flash al-
ternately in the DOT display.
