Blaupunkt ER04W, User Manual

Page: 5 / 34

5
Turning on/off the Reader
Press the Power on button for 1 second to turn on the Reader. Make sure to turn on the
Reader before connecting to your computer.
Press the Power on button again to turn off the Reader.
Charging the Reader
You need to charge the Reader when using it for the first time, or when the remaining
battery power is low. Charge the Reader in one of the following ways.
 Connect to an AC outlet using the AC Adapter (not included) with 5V 1 A for the
Reader.
It will take approximately 3 hours to fully charge the battery.
 Connect to a computer via USB. The charging through USB takes normally more time
than through an AC outlet.
To check the battery status
You can verify the remaining battery power by checking the battery indicator in the bottom
left of the screen. Charge the battery when remaining power is low (the fewer black
segments indicated, the lower the remaining power).
Notes
 While you use the delivered charger and USB cable to charge the Reader, you can
operate the Reader.
 While connected to your computer via USB, you cannot operate the Reader. But you
can copy or delete etc. files on the reader.

Do not leave the Reader connected to a notebook computer which is not connected
to an AC outlet for an extended period. It will consume the battery of the notebook
computer.
 Connection via an extension cable or USB hub is not guaranteed. Connect the USB
cable directly to the computer.

While the Reader is connected to your computer, do not turn on, restart, wake up
from sleep mode, or shut down the computer. These operations may cause the
Reader to malfunction. Disconnect the Reader from the computer before performing
these operations.