6
Power caution:
l Risk of product damage! Ensure that the voltage of power source corresponds to
the rating spec on the rating label of the clock radio rear panel. Only the supplied
DC power adaptor is allowed to use on this unit.
l Risk of electric shock! When you unplug the AC adaptor, always pull the plug from
the socket. Never pull the power cord.
Unit set up and power on/off
Using the supplied DC adaptor connect with the DC jack on the rear panel of unit, and the
another terminal connect to the main power source. The display will light up when you set up
the power successfully.
Short press the / FUNCTION button to power on and enter to the radio mode, shot press
the button again to switch the unit to Bluetooth mode. Press and hold the button will power
off the unit to standby mode.
Volume
On playing mode (FM radio or Bluetooth), short press the AL2 + or AL1 – button can increase
or decrease the volume.
Time setting
1. On standby mode, press and hold TIME SET MEMORY/PLAY PAUSE button for
two seconds till the display is blinking in order to start the time setting.
2. Press MINUTE TUNING > or HOUR TUNING < button to select 24 or 12 hours
format; Press TIME SET MEMORY/PLAY PAUSE button again to confirm the
selection, and the [00:00] or [12:00] digit will blink on display in order to start the
hour and minute setting
3. Press HOUR TUNING < button to adjust hour, and press MINUTE TUNING > button
to adjust desired minute.
4. Press TIME SET MEMORY/PLAY PLAUSE button again to confirm hour and minute
setting, or the setting will be confirmed automatically if no button is used within 3
seconds. Then the time setting is completed.
Alarm setting
Before start the alarm setting, please make sure that you have set up the clock time correctly.
The unit allows you to set up two separate alarm timers. For the alarm source, you can select
the FM radio or buzzer.
1. Press and hold FUNCTION button 2 second till enter to standby mode; Press
and hold AL1 + or AL2 - button for two seconds till the display time is blinking in
order to enter the alarm setting mode.
Press HOUR TUNING < or MINUTE TUNING > button to adjust the alarm time, and
pres
s
CR20BT
