8
Switching on by inserting a CD
If the unit is switched off and the CD
drive does not contain a CD,
➮
Press the
button
9
.
The flip-release panel opens.
➮
Gently insert the CD with the print-
ed side uppermost into the CD
compartment until you feel some
resistance.
The CD will be drawn automatically into
the drive.
You must not hinder or assist the drive
as it draws the CD in.
➮
Gently close the control panel
whilst exerting a little pressure until
you feel it click into place.
The unit switches on. CD playback be-
gins immediately.
Switching on/off
There are various ways of switching the
unit on/off:
Switching on/off using the vehicle
ignition
If the unit is correctly connected to the
vehicle’s ignition and it was not switched
off using button
3
, it will switch on/off
simultaneously with the ignition.
You can also switch the unit on even if
the ignition is off:
➮
To do so, press button
3
.
Note:
To protect the vehicle battery, the unit
will switch off automatically after one
hour if the ignition is off.
Switching on/off using the
removable control panel
➮
Remove the control panel.
The unit switches off.
➮
Attach the control panel again.
The unit switches on. The settings (ra-
dio, CD, CD changer or AUX) that were
set before the unit was switched off will
be reactivated.
Switching on/off using button
3
➮
To switch the unit on, press button
3
.
➮
To switch the unit off, press button
3
for longer than two seconds.
The unit switches off.
SWITCHING ON/OFF
