34
Switching on/off
You can switch the device on/off in the
following ways:
Switching on/off using the vehicle
ignition
If the device is correctly connected to
the vehicle’s ignition and it was not
switched off using button
1
, it will
switch on/off simultaneously with the
ignition.
Switching on/off using button
1
➮
To switch on the device, press
button
1
.
➮
To switch off the device, press and
hold down button
1
for longer
than two seconds.
The device switches off.
Note:
●
To protect the vehicle battery, the
device will switch off automatically
after one hour if the ignition is off.
Switching on by inserting a CD
If the device is switched off and there
is no CD present in the drive,
➮
gently push the CD with its printed
side uppermost into the drive
5
until you feel some resistance.
The drive draws in the CD automati-
cally.
You must not hinder or assist the drive
as it draws in the CD.
The device switches on and starts play-
ing the CD.
➮
First, pull the control panel straight
off the unit and then out towards
the left.
The device switches off.
All the current settings are saved.
Any CD already inserted in the unit re-
mains there.
Attaching the control panel
➮
Slide the control panel from left to
right into the unit’s guide.
➮
Carefully press on the left edge of
the control panel until it clicks into
place.
Note:
●
When attaching the control panel,
make sure you do not press the
display.
If the device was still switched on when
you removed the control panel, it will
automatically switch on again with the
last settings activated (i.e. radio, CD/
MP3, CD changer or AUX) when the
panel is replaced.
SWITCHING ON/OFF
CONTROL PANEL
02CalgMP36_gb
08.02.2006, 9:38 Uhr
34
