Blaupunkt BT15, Owner'S Manual

Page: 10 / 56

Bluetooth operation
The speaker includes Bluetooth function which allows you to wireless playback the audio
with other Bluetooth device like smart phone etc. Please follow up below for the operation.
1. Power on the unit and short press the “ M” button till the “ BLUE” show on display;
meanwhile , the LED will flare on the top panel which means the speaker is ready for
pairing.
2. Enable the Bluetooth function on your Bluetooth device, and search the available
Bluetooth device( please reference your device manual for the operation).
3. Check the available Bluetooth device on the menu list of your device, and select “ BP
BT15” in order to start pairing. Please key-in “0000” (4 zero) in case of a POP password
required during pairing. The LED will become stable when the pairing is successful.
4. Select and play the music on your Bluetooth device. Then the sound will output from
speaker.
5. During Bluetooth playback, you can short press the button to play or pause the music;
short press the + or – button to select next or last track; press and hold + or – button to
increase or decrease the volume.
6. Phone call hands free: when the cell phone was paired with speaker in Bluetooth mode,
and an incoming call is arriving; short press the button can pick up the call; answer the
phone by close to the front of speak within 30 cm(suggested) because the microphone
was built in on the rear side of speaker grill; short press the button again can end the
phone call and resume the music playback.
Notes:
a. All Bluetooth devices are not guaranteed to pair successfully due to different design and
brand.
b. Please do not put your cell phone very close to the speaker during phone call hands free
conversation, in order to avoid interference which will impact the conversation sound
quality.
c. The Bluetooth best working distance is within 10 meters without any obstacle in between.
FM radio operation
Before listen to the radio, please try to move the unit next to the window as you can, and
insert the supplied 3.5mm to 3.5mm stereo audio cable into the AUX IN jack as an external
antenna in order to get better reception.
1. Power on the unit, and short press the “ M” button repeatedly till “ RdO” shows on display.
2. Press and hold the button to auto scan and save the available FM station( max
supported 50 preset station ); short press the + or – to select the next or last preset station;
press and hold the + or – button to increase or decrease the volume; short press the
button can mute or resume the FM radio sound.
TF/MicroSD card playback
Please copy the MP3 format music into the TF or MicroSD card device (max supported 128GB)
before start the playing, and then insert the card into the slot on the rear panel of unit. Please
kindly note the TF/MicroSD card playback mode is only available when there have card
device installed on the speaker successfully.
Power on the unit, and short press “ M” till “ CARD” shows on display; the speaker will read out
the card device automatically, and get the music output after few seconds.
In TF/MicroSD card playback mode, short press the + or – button can select next or last track;
press and hold the + or – button can increase or decrease the volume; short press the
button to play or pause the music.
BT15 CLOCK
8