Blaupunkt BT03, Owner'S Manual

Page: 11 / 120

1. Power on the unit, press the play/pause button 2 seconds to switch and enter FM radio mode.
2. Short press the play/pause button to auto scan and save the available FM station( max
support up to 50 preset station ); short press the /- button to select the last or next
preset station; press and hold the /- button to decrease or increase the volume.
TF/MicroSD card playback
Please copy the MP3 format music into the TF or MicroSD card device (max supported 64GB)
before start the playing, and then insert the card into the slot on the rear panel of unit. Power
on the unit, press the play/pause button 2 seconds to switch and enter the MicroSD playback
mode; the speaker will read out the card device automatically, and get the music output after
few seconds.
In TF/MicroSD card playback mode, short press the /- button to select the last or next
track; press and hold the /- button to decrease or increase the volume. Short press the
play/pause button to play or pause the music.
Notes:
a. The TF/MicroSD card playback mode is only available when there have card device installed
on the speaker successfully.
b. The supported audio format is MP3/WAV in TF/MicroSD playback mode, but not guarantee all
mentioned audio file.
c. Not all TF/MicroSD card devices are supported due to different design and brand, the max
supported storage is 64GB.
d. Please kindly insert the TF or MicroSD card into the slot properly.
AUX IN/ MP3 link mode
Using the supplied 3.5mm to 3.5mm stereo audio cable connect the AUX jack on the speaker
rear panel with the line out or headphone jack on any other external audio player like mp3
player etc. Power on the speaker, press the play/pause button 2 seconds to switch and enter the
AUX IN playback mode; select and play the music from your external audio player, then the
sound will output from the speaker.
Notes:
a. In AUX IN mode, the main control is on your external audio player side. But you still can
increase or decrease the volume on the speaker side.
b. Please kindly note the AUX in mode is only available when the audio cable was plugged in.
The unit will switch to AUX IN mode automatically when you connect it with audio cable.
Specification:
Power source: DC5V, 1A; (or DC 5V, rating current above 1A)
Bluetooth version: 4.1 +EDR, best working distance within 10 meters
FM Frequency: 87.5~108.00MHz
TF/MicroSD card supported device till to 64GB max, support audio format MP3/WAV
Rated power: 1 x 3W
Battery power: 3.7V/1200 mAH rechargeable lithium battery
Charging time: approximately 3 hours base on DC5V, 1A input.
Music playback time: 3~4 hours around.
Power consumption: 3 Watt
Standby power consumption: < 0.5Watt
Accessory:1 pcs x USB charging cable , 1 pcs x 3.5mm to 3.5mm audio cable
(The above spec may revise without prior notice)
BT03
9