Selecting the waveband/
memory bank
This device can be used to receive stations
in the FM and AM frequency bands. Three
memory banks (FM1, FM2 and FMT) are
available for the FM waveband and two
memory banks (AM and AMT) for the AM
waveband.
Five stations can be stored in each memory
bank.
To switch between the FM1, FM2, FMT, AM,
and AMT memory banks,
briefl y press the
BND•TS
button
5
.
Tuning into a station
There are various ways of tuning into a sta-
tion:
Automatic station seek tuning
Press the or button
2
.
The radio tunes into the next receivable sta-
tion.
Tuning into stations manually
You can also tune into stations manually.
Press the or button
2
.
Adjusting the sensitivity of the
station seek tuning (SENS)
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
Press the
MENU
button
>
.
The display shows "MENU".
W
W
W
W
Press the or button
2
repeatedly
until "SENS" and the currently set value
appears on the display.
"SENS HI" means a high sensitivity,
"SENS LO" a low sensitivity.
Press the button
2
to open the sub-
menu.
Set the desired sensitivity level using
the or button
2
.
When you have fi nished making your
changes,
press the
MENU
button
>
.
To exit the menu,
press the
ESC
button
<
.
Note:
You can adjust different sensitivities for
FM and AM.
Storing stations
Storing stations manually
Select the desired memory bank FM1,
FM2, FMT, AM or AMT waveband.
Tune into the desired station.
Press and hold down one of the station
buttons
1
-
5
8
for longer than two
seconds to assign the station to that
button.
Storing stations automatically
(Travelstore)
You can automatically store the fi ve sta-
tions offering the strongest reception in
the region for the FM and AM wavebands.
The stations are stored in the FMT or AMT
memory bank.
W
W
W
W
W
W
W
W
15
EN
GLISH
Radio mode