46
Adjusting the subwoofer phase
position
You can adjust the phase position of the
subwoofer output to your subwoofer and
select between "-135°" and "180°" in incre-
ments of 45°.
Press the
AUDIO
button
:
.
"AUDIO MENU" appears on the display.
Press the softkey
5
with the display
label "SUBOUT".
Press the softkey
5
with the display
label "PHASE".
Move the joystick
8
to select from the
possible settings.
When you have fi nished making your
changes,
press the
OK
joystick
8
or the
AUDIO
button
:
.
Setting the low-pass fi lter
The low-pass fi lter allows you to defi ne a
frequency up to which the subwoofer will
operate. All signals above the defi ned fre-
quency are "cut off" and not passed on to
the subwoofer.
You can select from the frequencies
"40 Hz", "50 Hz", "63 Hz" and "100 Hz". If
your subwoofer features a built-in low-pass
fi lter, you can also select the setting "FLAT"
and thereby forward all frequencies to the
subwoofer.
Please adjust this setting to the frequency
range and the capabilities of your subwoof-
er. For further details, please read the doc-
umentation of the subwoofer.
쏅
쏅
쏅
쏅
쏅
Press the
AUDIO
button
:
.
"AUDIO MENU" appears on the display.
Press the softkey
5
with the display
label "SUBOUT".
Press the softkey
5
with the display
label "LOWPASS".
Move the joystick
8
to select from the
possible settings.
When you have fi nished making your
changes,
press the
OK
joystick
8
or the
AUDIO
button
:
.
Setting the subsonic fi lter
To avoid interferences from extremely low
frequencies, you can use the subsonic fi lter
to limit the low-frequency response of the
device. This is particularly useful for small
subwoofers. The setting of the subsonic fi l-
ter suppresses all frequencies below the de-
fi ned frequency. When setting the subsonic
fi lter, you should orient yourself by means
of the loudspeaker setup of your vehicle.
You can select from the frequencies "20 Hz",
"25 Hz", "32 Hz" and "40 Hz". In addi-
tion, you can set the quality factor "Q" for
the selected frequency in fi ve increments:
"Q1"=0.5, "Q2"=0.7, "Q3"=0.9, "Q4"=1.1
and "Q5"=1.3.
If you select the setting "FLAT", the frequen-
cy response of the device is not affected.
Press the
AUDIO
button
:
.
"AUDIO MENU" appears on the display.
Press the softkey
5
with the display
label "SUBOUT".
Press the softkey
5
with the display
label "SUBSONIC".
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Subwoofer and centre speaker
01BremenMP76US_gb.indd 46
01BremenMP76US_gb.indd 46
7/28/06 11:28:29 AM
7/28/06 11:28:29 AM