Bluetooth operation
BLUETOOTH PAIRING
1. Put the Bluetooth device (e.g. smart phone) within the 10m Bluetooth search range.
Then turn on the Bluetooth function on the phone.
2. Press
BLUETOOTH
button on remote or press
SOURCE
button on the panel to
enter Bluetooth mode. The indicator flashes blue quickly in pairing status.
3. Enter the Bluetooth searching interface on the phone and start to search the devices.
4. Select the device name
BPT6021BT
from the search list. If they’re paired successfully,
there comes a audible signal and the indicator lit steadily in blue.
5. Some device may ask you to select
OK/YES/PAIR
to pair the phone with the unit.
And some even ask to input the password, just input “
0000
" (four Zero) to pair.
6. To disconnect the device and connect to a different device:
Turn off the Bluetooth function on your device and un-pair the unit with the BT
device. Then follow the pairing
Steps 2-5
to pair with a new device.
NOTE:
1. Some devices connect immediately after pairing so the indicator remains on.
2. If the device is out of Bluetooth range (10m), put the device within the BT search
range and make connection again manually if it is suspended.
9
NFC operation
1.
device with NFC function.
2. If your device has NFC function, check if the NFC software is available for use and
turn on the function, please refer to your device’s instructions.
3. Turn on the unit to “bt” mode. Place your NFC device (e.g. smart phone with NFC) on
the NFC sensor for 3 seconds.
4. When they are paired successfully, there will be a audible sound from the unit.
5. To disconnect the device of the NFC connection, place the phone again on the NFC
sensor for 3 seconds, and then will automatically disconnect.
NFC function is a fast connection between our tower and a
NOTE:
1. Not all devices support NFC function. please check your instructions.
2. Some NFC device make ask you to install the NFC APK to enable the function.
3. Always place the NFC device on the correct pisition of the NFC sensor.
