Blaupunkt BP5040UHD, Instruction Manual, Page: 34 / 36

Simple Troubleshooting
Maintenance and Service
If the display fails or performance dramatically deteriorates, check the display in accordance
with the following instructions. Remember to check the peripherals to pin point the source of
the failure.
No Power
- Press either the power button or the Standby button on the Remote control.
No Picture or Sound
- Ensure that the TV is plugged in and the power is on.
- Ensure that the aerial is connected.
- Try a different program.
Poor Picture Quality
- Check the aerial connections and your aerial.
- Check that the channel is tuned in properly.
- Adjust the picture settings: Brightness, colour, sharpness, contrast.
- Make sure that the TV is not located close to electrical appliances that
may emit radio frequency interference.
No colour
- Adjust the colour setting.
- Check that the programme is broadcast in colour.
- Check that the channel is tuned properly.
TV does not respond to remote control
Unable to watch 4K content
-Check that you are using HDMI1/2/3(Only HDMI supproted)
-Check that your external product can output 3840x2160(24p/25p/30p).
-Note: 1. Not all Blueray players support UHD 3840x2160(24p/25p/30p) upscaling, refer to Blueray
player User Guide.
2.Not all discs can be upscaled to UHD. Refer to disc information.
-Downloaded content played via an external device will not be supported unless the above format is
used 3840x2160(24p/25p/30p).
- Check that there are no obstructions between the remote control and the unit.
- Check that the remote control is within range of the unit.
- Check that the batteries in the remote control and not weak or exhausted.
- Check all connections to the TV.
31