BP Car Phone 3.0 C User Manual
25
9.6.6.2.1 Microphone
To set the microphone gain to
0dB
,
+1dB
or
+2dB
select
MENU > SETTINGS > DEVICE >
CONFIGURATION > CHANGE > MICROPHONE
. Choose the option you want and confirm by
selecting
OK
.
9.6.6.2.2 Second interface
To detect an optional module, for example a second handset select
MENU > SETTINGS > DEVICE >
CONFIGURATION > CHANGE > SERIAL INTERFACE
. With constant use of the same module it is
recommended that the module is set up directly and not left to
AUTOMATIC
. This bypasses the test
procedure for automatic detection when turning the device on.
The following setting options are available:
-
MODEM
A computer can be connected. The PTCarPhone in this case acts as a
modem. GPS can not be accessed in this mode.
-
2. HANDSET
An additional handset can be connected.
-
GPS
An external GPS device can be connected. The baud rate in the submenu
must be set to the baud rate of the GPS device.
A supply voltage of 10.8 V with a maximum of 200 mA is available.
-
AUTOMATIC
The connected accessories are automatically detected when the PTCarPhone
is turned on.
9.6.6.2.3 Restoring factory settings
To restore factory settings select
MENU > SETTINGS > DEVICE > CONFIGURATION > CHANGE
> RESTORE FACTORY SETTINGS
and confirm that you are sure by selecting
YES
. Alternatively
cancel by selecting
NO
or using the end key.
9.6.6.2.4 Operation mode
The device has several different operation modes. Each operation mode enables different usage of the
phone book and the handset’s menu tree. The operation mode can be changed via
MENU >
SETTINGS > DEVICE > CONFIGURATION > CHANGE > OPERATION MODE
.
Operation mode 0:
In this mode the device works like a normal phone. The phone book available is the same as the
selected directory. There are no restrictions on the handset’s menu tree. This is the active mode when
the device is issued.
Operation mode 1:
This mode restricts the use of the phone in terms of its phone book. Only the internal phone book is
available. The menus for editing the phone book no longer appear in the handset. There are however no
restrictions on dialing and sending messages via the keypad.
Operation mode 2:
