32
2.7 Loop me!
Via the function „Trip Manager“ you can call up the feature
„Loop me!“
.
You can now plan a circuit either from your
current position
or from any
other point
you want, such as a POI, a city or your home address.
As a next step, you can set your desired
parameters
. This may for example be the
desired
distance
or you can also restrict the
duration
of the circuit.
It is possible, for example, for you to enter 20 km, or correspondingly 3 hours.
LOOP ME!
24
In a next step, you are asked what
activity
you are performing. If you are out cycling
and you want to do a circuit, click on „Bicycle“; if you are out walking, click on
„Pedestrian“.
You can now select what
your circuit
should look like. For example, if you would
prefer to plan a more sporty route, then click on „Hilly“; if you would prefer not to climb
too many hills, then click on „Flat“. Once you have done this, you can now stipulate
what type of routes you would mainly like to travel on. For example, you can set it so
that you will be guided primarily along cycle paths.
