background image

INTRODUCTION

Proper system planning is vital in order to 

maximize the device’s performance and road 

safety. Plan your installation carefully to avoid 

compromising performance reliability of the 

system. Consult an authorized Blaupunkt delaler 

for installation or reparation. Read the manual 

carefully before operating the device for the 

first time.

Safety Notes

Ensure to follow below safety notes during 

installation and wiring connection: -

Installation and Connection Instructions

Voltage Supply

Disclaimer

In no event shall Blaupunkt be liable for any 

direct, indirect, punitive, incidental, special 

consequential damages to property or life and 

whatsoever arising out of or connected with the 

use or misuse of our products.

USA & CANADA: This product is not intended 

for sale in the United States and Canada. If 

purchased in the U.S. or Canada, this product is 

purchased on as-is basis. No warranty, whether 

expressed or implied is provided in the U.S. or 

Canada.

Recycling and Disposal

 

This manual may be updated from time to time 

without any notice.

Disconnect the negative terminal of the 

battery. Refer to the safety notes of the vehicle 

manufacturer.

Ensure positions of the holes are nowhere 

near the vehicle component to avoid any 

damage during drilling.

Ensure cross section of the cable is no less 

than 2.5mm2 if the positive and negative 

cables are too long.

Incorrect installation may result in malfunc-

tion of the device or the car sound system.

Select a dry and well-ventilated location to 

install the device.

The device must not be installed in overly 

exposed location such on the rear shelf, rear 

seat etc.

The installation location must be suitable for 

screw holes and have stable ground support.

Use the supplied power extension cable to 

connect to the positive battery terminal.

Firmly and carefully connect the ground lead 

to a bare metal point on the vehicle chassis.

The control of the device should be a

two-channel control, either via the preampli-

fier output of the car sound system. A control 

solely via the right or left channel is also pos-

sible since the low-frequency portion of the 

music is generally identical on both channels.

1

Do not  dispose your old unit in 

the household trash!

Use the return and collection 

items available to dispose of the 

old device.

Summary of Contents for BGx 2 Series









Reviews: