Blaupunkt BB18, Owner'S Manual

Page: 8 / 84

Clock and alarm setting
Clock setting:
press and hold power/mode button 2 seconds enter to standby mode, press repeat/clock set button to start the
setting, rotate the previous/next knob to switch the time format between 12/24 hours, press repeat/clock set button again to
confirm the selection, repeat previous operation to set up the hour and minute.
Alarm setting: in standby mode, press and hold the timer button 2 seconds to start and make the hour digits flare on display;
Press the previous/next button to adjust the hours and press the timer button again to confirm the selection; repeat the
previous operation to set up the minute/alarm source(CD/USB/BUZZ/FM)/alarm volume etc.
a. The clock and alarm is only working when there have available source. Please set up the clock and alarm again in case of
power interrupted.
b. Short press the timer button in standby mode can turn on or off the alarm.
c. When the alarm is activate and ring up, short press the power/mode or timer button to cancel the alarm voice, and there will
wake up you again when the alarm time is being next day.
d. The alarm voice duration time is 5 minutes if you did not cancel the sound.
e. When you selected CD/USB as alarm source, please make sure the relative device is available, otherwise, there will switch to
buzz.
CD operation
This unit can playback CD disc which is under CD/CD-R/CD-RW/MP3 format. Before start the playback, please check the CD disc
format first, and mare sure the CD disc is clean and no damages.
CD playback: Open the CD door and load a CD disc, then close the door. Press the power/mode button switch to CD mode; then
the unit will read out the CD and get sound output automatically.
In CD playback mode, turn the volume knob to adjust the volume output level; press the play/puase button to pause or resume
the playback; press stop button for playing stop; rotate the previous and next knob to select the track, Press the repeat button
for repeat one/repeat
all/repeat folder (only shows repeat text on display, function available on MP3 playback in case
of more than one folder inside) /random selection; Short press the +10 button to select the playing per 10 tracks.
Programming playback (up to 20 tracks for CD disc, and 99 tracks for MP3 disc): press the stop button to stop the CD
playback first; press the program button to start programming; the display will show “ P01” and“ PROG”; rotate previous and
next knob to switch and select the track which you desire to be programmed, then press the program button to confirm
the selection; and the track will be saved as P01. Repeat the operation till “FUL” show on display which mean the programming
memory is full. Press the play/pause button to play the programmed track; open the CD door or press the stop button twice to
cancel and remove the programmed CD.
Radio operation
Before start the radio operation, please kindly full extent the FM antenna and try to put the unit next to the window in order to
get better signal and reception.
Station tuning and auto scan : rotate the tuning knob in clockwise or counterclockwise direction to tune the radio frequency
per 0.1MHz; press scan button to auto scan and save the available station.(Max supported preset station up to 40). Press the
preset button to pick up and switch the preset station.
Station manual memory: When you tuned a favourite station by rotate the tuning knob or scan; press and hold the program
button 2 seconds first,, then rotate the tuning knob to select the preset station number which you desire to be saved, press the
program button to confirm the selection; repeat the operation to save other station.
In FM radio mode, press the stop/Mono stereo button can switch the output; you can switch to mono output for listening in
case of weak signal station.
USB playback operation
Before start the USB card playback operation, please copy the MP3 audio file into the device (max supported device up to
32GB), then insert the device into the USB card port properly.
Press the power/mode button repeatedly enter to the USB mode, then the unit will auto decode the audio file and get sound
output after a while.
In USB mode, press the play/puase button to pause or resume the playback; press stop button for playing stop; rotate the
previous and next knob to select the track, ; press the repeat button for repeat one/repeat all/repeat folder/random selection;
short press the +10 button to switch the playing per 10 tracks.
Note:
a. Using a extension cable for USB stick connection and playback is not recommended due to audio signal transfer which may
cause sound output intermittently
b. Not guarantee all USB card devices are supported due to different design and brand.
c. Not guarantee all MP3/WMA audios can playback successfully.
6