12
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into tho-
se with a weak reception.
Press the
MENU
button
9
.
Press the or button
:
repeated-
ly until “TUNER MENU” appears on the
display.
Press the button
:
to open the
menu.
Press the or button
:
repeatedly
until “SENS HI” or “SENS LO” appears
on the display.
“SENS HI”means a high sensitivity setting
and “SENS LO”means a low sensitivity set-
ting.
Set the desired sensitivity level using
the or button
:
.
When you have fi nished making your
changes,
Press the
MENU
button
9
twice.
Note:
The device will store the sensitivity set-
ting selected in FM and AM waveband.
쏅
쏅
쏅
쏅
쏅
쏅
Selecting the waveband/memory
bank
This device can receive programmes
broadcast over the FM and AM frequency
ranges. There are three memory banks
available for the FM waveband (FM1, FM2
and FMT) and one for the AM waveband.
Six stations can be stored in each memory
bank.
To switch between the memory banks FM1,
FM2 and FMT and the AM waveband,
Briefl y press the
BND•TS
button
6
.
Tuning into a station
There are various ways of tuning into a
station.
Automatic station seek tuning
Press the or button
:
.
The radio tunes into the next receivable
station.
Tuning into stations manually
You can also tune into stations manually.
To change the set frequency in small incre-
ments,
Briefl y press the or button
:
.
To change the set frequency quickly,
Press and hold down the or button
:
for a longer period of time.
쏅
쏅
쏅
쏅
Radio mode
BA_BahamasMP46_EN.indd 12
BA_BahamasMP46_EN.indd 12
4/5/06 9:00:20 AM
4/5/06 9:00:20 AM
