Blaupunkt B1111T, Instruction Manual

Page: 18 / 88

15



Turn the air conditioner off, then drain the water tank by unplugging the
drain cap and allowing the water to flow onto the drain pan. The drain pan
will not hold the full contents of water tank. A number of fills of the drain pan
are required. lt may be easier (after 3 or 4 pans have been drained in order to
avoid accidental spillage when moving the air conditioner) to wheel the unit
outside, remove the drain cap and drain the water onto the ground freely.
The water tank is considered sufficiently when no more water flows from the
drain outlet to completely drain all water from the water tank, tilt the unit by
lifting it slightly upwards from the front until no more water drains from the
outlet
Restart the air conditioner by pressing the ON/OFF button. Ensure that the
unit is in COOL, DRY or HEAT mode. The compressor will start approximately
3 minutes after the unit is switched on.
As a safety measure, to positively prevent water spillage, the air conditioner
is equipped with a fail safe device, if, the water tank fails. The unit will com-
pletely stop the control panel displays „ " (FULL TANK as mentioned in
SELF-DIAGNOSIS), the compressor and fan will nor restart until the tank has
been drained.
NOTE
•
•
•
INTERMITTENT DRAINAGE (fig. 4 and fig. 5)