Blaupunkt ATF301, Instruction Manual

Page: 7 / 80

4. Control panel with buttons
1. Front fan grille
2. Base
3. Fan blade
5. Back grille
7. Motor housing
9. Grille fixing screw
6. Motor shaft stem
8. Oscillation lock
5. Vertical tilt adjustment. To change the fan tilt, hold the appliance in position and tilt the motor body.
3. Disassembly:
3 - high speed
3. To turn off the fan, press the 0 button on the control panel.
a) Perform the disassembly in the reverse order of the assembly procedure.
FAN OPERATION
2 - medium speed
4. Oscillation. To enable the fan's oscillation movement, press the oscillation lock. To disable the fan's
oscillation movement, lift the oscillation lock.
1 - low speed
1. Before connecting the fan to the power supply, make sure that the button on the control panel is set
to 0. Connect the appliance to the power supply.
2. To start the fan, press one of the buttons on the control panel:
CLEANING AND MAINTENANCE
Before cleaning and maintenance, make sure that the fan has been disconnected from the power
source.
The fan should be cleaned regularly. Body, posture should be wiped with a dry cloth. The interior
should be blown out with compressed air or vacuumed with a vacuum cleaner.
2. Assembly:
a) Put the back grille (5) on the motor base (pay attention to the notches).
b) Put on the fan blade (3) paying attention to the notch in the stem (6) and the fan blade opening.
c) Install the fan's front grille (1) by fitting the edge into the hooks on the back grille. Then secure by
tightening the grille's fixing screw (9).
1. Make sure the appliance is disconnected from the power source.
APPLIANCE ASSEMBLY AND DISASSEMBLY
5
ATF301