Blaupunkt ACF601, Instruction Manual

Page: 7 / 92

1b) Fan speed button
1. Control panel
1d) Timer button
1a) Power button
1f ) Vertical oscillation button
1c) Cooling function button
1e) Horizontal oscillation button
1g) Night mode function button
2. Small tank lid
3. Handles
10. Water tank
12. Cooling pack
11. Water tank cap
8. Rear grille
9. Water curtain
5. Water level gauge
6. Air outlet grille
7. Wheels
4. Unit body
1. Check that the unit is properly assembled:
WARNING: When placing ice cubes or cooling packs, make sure the water level does not exceed the
maximum water tank level.
- the unit is set firmly on 4 wheels.
4. Place the unit body on the water tank (with the control panel facing upwards). Make sure that the
pump handle is extended. Lock the wheels.
5. Connect the unit to the power source. Press the power button to turn the fan on. The unit has
memory support for the last selected operation mode. It will be reset when the unit is disconnected
from the power source. By default, the fan will start at maximum speed.
USE
- the water curtain and rear grille are correctly installed;
2. Fill the water tank with water Do not exceed the maximum level, marked MAX. Water can be poured
directly into the water tank after removing the unit body, or using a vessel/bottle after opening the lid
of the small water tank (pay attention to the water level indication in the tank).
3. To increase cooling efficiency, it is recommended to use cooling packs (chilled for several hours in
the freezer) or ice cubes. The cooling packs can be placed in the water tank or in the small tank. The
highest cooling efficiency is achieved by inserting the cooling pack into the small water tank.
6. To change the fan rotation speed, press the fan speed button .
7. The vertical and horizontal oscillation function can be switched on and off using the and
buttons.
11. Night mode: Press the SLEEP button to start the night mode. It will change colour, the other
indicators will go out. The unit will reduce the fan speed every 20 minutes until it reaches the
minimum.
10. Automatic switch-off. The unit will switch off automatically after 24 hours. Press the power button
to turn it back on.
12. Remote control: the functions of the buttons on the remote control correspond to the buttons on
the control panel.
8. The cooling function can only be activated if the water level in the water tank is above the MIN
indicator. Make sure that the pump handle is extended. When the cooling button is pressed, the
pump will start to direct the water to the small water tank from where it will seep into the water
curtain.
WARNING: If the water level in the tank falls below the minimum level, the cooling function will switch
off automatically, the unit will produce a sound signal and the cooling button will begin to flash.
CLEANING AND MAINTENANCE
Make sure the unit is disconnected from the power source.
9. The unit has a delayed shut-down function. Each time the Timer button is pressed, it will set a
delayed shut-down in 1, 2, 4, 8 hours. The appropriate indicator will signal the selected setting.
Wipe the housing with a soft damp cloth. Then wipe dry.
5
ACF601
SLEEP
MODE
SWING
OSC
ON/OFF
SPEED
COOLER
TIMER
SWING
OSC
ON/OFF
SPEED
COOLER
TIMER