www.blaupunkt.com
BAC-PO-1414-Q11L
19
(2)
Use the TIMER to configure the Auto-Off time during operation, or configure the
Auto-On time in standby mode.
(3)
While configuring the TIMER, both the <
> key and the <
> dial are available
to adjust the desired time.
(4)
With each press of the TIMER key, the value on the <
> display increases from
→
→
"00"
"01"
to "24" and back to "00" again.
(5)
Configure the Auto-Off timer:
a.
Press the <
> key to preset the Auto-Off timer. The <
> display will
flash the configured time on the screen. After configuration, the display will
return to show the operating mode after 5 seconds.
b.
Press the <
> key before the preset time to cancel the Auto-Off timer. The
appliance will turn off.
(6)
Set the Auto-On timer:
a.
While configuring the Auto-On timer, you can preset functions at the same
time.
b.
Press the <
> key to configure the Auto-On timer. After configuration, the
display will show the remaining time.
c.
Press the <
> key before the preset time to cancel the Auto-On timer. The
appliance will turn on.
d.
After configuring the Auto-On timer, the appliance will remain available to
control or switch to other functions.
IV.
SLEEP Mode:
(1)
The appliance defaults not to SLEEP mode disabled when powered on.
